INTERACTIVE CLINICAL & LOGISTICS SUITE

Interactive Chairside Material, Implant & Turnaround Tools

Use our live clinical tools to select optimal ceramic blocks by stump shade and occlusal load, verify 40+ implant scanbody libraries, and calculate exact courier arrival dates to your clinic.

0 (850) 300 44 00
INTERACTIVE CHAIRSIDE DECISION TOOL

Clinical Case & Prosthetic Material Advisor

Select your clinical region, stump shade, occlusal load, and retention preference to view recommended block specs, minimum prep clearance (mm), and bonding protocol.

RECOMMENDED CAD/CAM PROTOCOL STL Turnaround: 3 Business Days

IPS e.max Press / CAD Lithium Disilicate (HT / MT / LT)

Optimal enamel-like optics and micromechanical bond strength on natural light substrates under normal anterior guidance.

Flexural Strength & Optics
470–530 MPa — High Natural Translucency
Minimum Prep Clearance
Labial 0.4–0.6 mm — Incisal 1.0 mm
Intaglio & Cementation Protocol
20 sec 5% Hydrofluoric Acid etch + 60 sec Silane/MDP + Light-cure adhesive resin cement.
LIVE TURNAROUND & LOGISTICS ESTIMATOR

Calculate Exact Clinic Delivery Day by Province & STL Intake

Select your clinic province, impression method, and prosthetic type to calculate real business-day design preview, 5-axis milling completion, and courier arrival dates.

01
Scan Triage & 3D Exocad Preview — 15-min live margin & clearance verification
02
5-Axis Milling, Sintering & 20x QC Dispatch — Dispatched in sterile membrane box with lot card
03
Estimated Arrival at Your Clinic — —
LIVE CAD LIBRARY VERIFICATION

Check Your Implant System’s Digital CAD/CAM Compatibility

Search across 40+ global, Korean, and domestic implant platforms supported in our licensed Exocad & 3Shape CAD libraries.

Straumann® (BL / BLX / TL) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Nobel Biocare® (Active / Parallel / Replace) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Astra Tech® OsseoSpeed EV / TX Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Medentika® (IPS / Multi-Platform) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Megagen® (AnyRidge / AnyOne / BlueDiamond) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Osstem® TS / Hiossen® ET Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Zimmer Biomet® (TSV / Trabecular) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

BioHorizons® Tapered Internal Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Camlog® / Conelog® Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Dentsply Ankylos® C/X Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Neodent® (Grand Morse / CM) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Dentium® (SuperLine / Implantium) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

BEGO® Semados (SC / RS / RSX) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

MIS® (C1 / Seven / V3) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Anthogyr® Axiom / Thommen® SPI Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 25° ASC / Multi-Unit Bar

Bilimplant® (3P / Konik / Multi-Unit) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

NucleOSS® (T4 / T6) Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

Implance® / Mode® / DTI® Active Library

Scanbody STL / Ti-Base / Pre-Milled Ti / 20° ASC / Multi-Unit Bar

DIGITAL MESH TO MICROSCOPIC CERAMIC

Inspect Our Exocad CAD Architecture vs. Finished Ceramic

Slide left or right to inspect how digital emergence contours, contact tightness, and dynamic occlusion translate directly into 20x microscope-finished restorations.

Inspect Our Exocad CAD Architecture vs. Finished Ceramic
Inspect Our Exocad CAD Architecture vs. Finished Ceramic
01 — Exocad 3D CAD Design 02 — 20x Finished Ceramic
CENTRAL PRODUCTION & LOGISTICS

CAD/CAM Production Center & Operating Hours

We receive digital STL impressions within seconds via 3Shape Communicate, Medit Link, and iTero, delivering precision restorations via insured courier to dental clinics across all 81 provinces.

Central Milling Campus & Logistics

Premium Dental CAD/CAM Manufacturing Center, Turkey (Nationwide 81-Province Delivery)

EXPRESS COURIER & CARGO

Same-Day City Courier & 81-Province Insured Delivery

View on Google Maps
Lab Production Hours
  • Monday 08:30 - 18:30
  • Tuesday 08:30 - 18:30
  • Wednesday 08:30 - 18:30
  • Thursday 08:30 - 18:30
  • Friday 08:30 - 18:30
  • Saturday 09:00 - 15:00
  • Sunday CLOSED
ISO 13485:2016 Medical Device Quality System
CE 93/42/EEC Certified Biocompatible Blanks
FDA 510(k) Registered Ceramic & Ti Alloys
20x QC Audit Stereo-Microscope Margin Release
DIGITAL LAB PARTNERSHIP

Ready to Upgrade Your Clinic’s Prosthetic Workflow?

Contact our technical desk to pair your intraoral scanner or request our clinic fee schedule.